Flexible hose coolant flat nozzle

Brand: WELDRACINGPARTS

Mandrel bend 1,5" 45 degree

Exhaust curve 1,5" Length 10"  wall thickness 1/16" stainless steel 304L 45 degree.

Reference: 27

Brand: WELDRACINGPARTS

3,5" V-band kit flange

3,5" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated ones that can be found cheaper and of poor quality.

Brand: WELDRACINGPARTS

Nozzle box gas lens nº4L, 10 units

Ceramic nozzle box for alumina Gas Lens Nº4L WP-9, WP-20, WP-26 10 units

Brand: WELDRACINGPARTS

AN 6 stainless steel hexagonal

AN -6 (AN6) flare stainless steel weld on adapter, weld this to your fuel tank, oil cooler, radiator tank, manifold, or any other stainless steel tank, etc.

Reference: 366

Brand: WELDRACINGPARTS

Flexi pipe 2" smooth inner

Flexi pipe 2" diameter, 3,93" lengths of 304L stainless steel 

Brand: F4U

Exhaust pack 2" heat shield Renault 5 Gt Turbo

Exhaust saving pack for R5 GT Turbo stainless steel high performance exhausts. The pack consists of manifold and down pipe with heat shield and full exhaust section of 2" diameter. All of them are dyno tested to significantly increase engine performance.

Reference: 338

Brand: WELDRACINGPARTS

Exhaust pipe cone 2,5" to 3"

Stainless steel exhaust cone 304 large diameter 3", small diameter 2,5", 3,14" length, wall thickness 1/16"

Reference: 317

Brand: WELDRACINGPARTS

Exhaust T joint 2" x 1/16"

Make your own custom exhaust from 304L stainless with a quality finish.

Brand: WELDRACINGPARTS

Tungstens tig ythrium blue

WELDRACINGPARTS Yttrium Tungsten contains 1.8% -2.2% Yttrium, which its 2.8eV-3.2eV electron function, 10-piece TIG torch welding electrodes - Dimensions: 1.6MM, 2MM, 2.4MM x 150mm

Brand: WELDRACINGPARTS

Round tube St52 1,57"X1/16" 1 meter

St 52 Ducal seamless tube 1,57"X1/16", 1 meter

Brand: WELDRACINGPARTS

Elbow 0,78"x1/16" 90 degree

Stainless steel elbow 0,78x1/16" 304L, 90 degrees. 30 radius

Reference: 348

Brand: WELDRACINGPARTS

Exhaust pipe cone 1,69" to 1,9"

Stainless steel exhaust cone 304 large diameter 1,9", small diameter 1,69", 3,14" length, wall thickness 1/16"

Brand: WELDRACINGPARTS

Elbow 1,57"x3/63" 90 degree

Stainless steel elbow 1,57"x3/63" 304L, 90 degrees, 60 radius

Brand: WELDRACINGPARTS

Collets 2mm WP-9, WP-20, WP-26

Collets for torch WP-9, WP-20, WP-26 2mm

Reference: 353

Brand: WELDRACINGPARTS

2,5" V-band flange

2.5" V-Band kit flange clamp stainless steel 304, unlike the zinc-plated ones that can be found cheaper and of poor quality.

Brand: WELDRACINGPARTS

Aluminum straight tube 0,62"x1/16" 1 meter

Aluminium tube 0,62"x1/16" 6060 t66, 1 meter