Curvado
Banner
Stainless steel elbow 2,5"x1/16" 304L, 90 degrees, 95 radius
Simply put, the steel elbow is a type of connection that joins two pipes. The main purpose is to change the direction of liquids flowing through the pipe. As we already know, the steel elbow can be classified according to its grades. Generally, we find 45 degree steel elbows, 90 degree steel elbows and 180 degree steel elbows. Other grade types such as 60 and 120 can also be found in piping systems, but this is only in cases with special requirements.
Specific References
Reference: 22
Brand: WELDRACINGPARTS
2.5" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated ones that can be found cheaper and of poor quality.
Reference: 80
Brand: WELDRACINGPARTS
Exhaust flexi pipe 63 or 2'5" milimeters diameter to 3,93" lenght 304L stainless steel
Brand: WELDRACINGPARTS
Make your own custom exhaust from 304L stainless with a quality finish.
Brand: WELDRACINGPARTS
2.5" Stainless steel weld-on downpipe exhaust flange 3 holes
Brand: WELDRACINGPARTS
Stainless steel straight tube 2,5"X1/16" 304L
Reference: 320
Brand: WELDRACINGPARTS
Make your own custom exhaust from 304L stainless with a quality finish.
Reference: 340
Brand: WELDRACINGPARTS
Stainless steel exhaust cone 304 large diameter 2,5", small diameter 2", 3,14" length, wall thickness 1/16"
Brand: WELDRACINGPARTS
WELDRACINGPARTS Tungsten TIG welding Pure Green WP 20 professional, welding electrodes TIG torch, 10 units - Dimensions: 1.6mm 2mm, 2.4mm x 150 mm
Brand: F4U
Exhaust saving pack for R5 GT Turbo stainless steel high performance exhausts. The pack consists of manifold, down pipe and 2" diameter. swan neck. All of them are dyno-tested to significantly increase engine performance.
Reference: 366
Brand: WELDRACINGPARTS
Flexi pipe 2" diameter, 3,93" lengths of 304L stainless steel
Brand: F4U
Downpipe for R5 GT Turbo in stainless steel with standard flange and heat shield, 500 grams lighter than the previous model.
Brand: WELDRACINGPARTS
The Argon / CO2 / Inert Gas Pressure Reducer is a compact precision control device that requires no maintenance.
Brand: WELDRACINGPARTS
Iron square tube 40mmx40mmx1,5mm of thickness hot rolled finish.
Brand: WELDRACINGPARTS
Iron square tube 35mmx35mmx1,5mm of thickness hot rolled finish.
Brand: WELDRACINGPARTS
Ceramic nozzle for Gas Lens alúmina Nº5L WP-9, WP-20, WP-26
Reference: 389
Brand: WELDRACINGPARTS
1.75" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated ones that can be found cheaper and of poor quality.
Brand: WELDRACINGPARTS
Ceramic nozzle box for alumina Gas Lens Nº6 WP-9, WP-20, WP-26 10 units
Brand: WELDRACINGPARTS
2,37" to 2,75" unpolished 304L stainless steel exhaust tailpipe, length 7"
Stainless steel elbow 2,5"x1/16" 304L, 90 degrees, 95 radius
