Curvado
Banner
Stainless steel straight tube 1,9"X5/64" 304L.
Unpolished 304 stainless steel tube to manufacture your exhausts. It is sold in 2-metre maximum lengths unless otherwise requested by the customer. In bars of 2 meters or more, transportation costs may be increased.
Specific References
Brand: WELDRACINGPARTS
Opel Speedster motor Z22Se manifold flange, oval holes to build your own exhaust manifold.
Reference: 205
Brand: WELDRACINGPARTS
Stainless steel elbow 1,9"x5/64" 304L, 90 degrees, 57 radius
Reference: 343
Brand: WELDRACINGPARTS
Stainless steel exhaust cone 304 large diameter 2,5", small diameter 1,9", 3,14" length, wall thickness 5/64"
Reference: 344
Brand: WELDRACINGPARTS
Stainless steel exhaust cone 304 large diameter 2", small diameter 1,9", 3,14" length, wall thickness 5/64"
Reference: 345
Brand: WELDRACINGPARTS
Stainless steel exhaust cone 304 large diameter 1,9", small diameter 1,77", 3,14" length, wall thickness 5/64"
Brand: WELDRACINGPARTS
Steel flat bar of 16mmx4mm of thickness hot rolled finish, length.
Brand: WELDRACINGPARTS
8mm and 500mm long 304 stainless steel rod to make custom exhaust brackets.
Brand: WELDRACINGPARTS
1.1bar (16psi) radiator pressure cap for weldable aluminium spout, 30mm on the welded side and 50mm on the filling side where the plug is threaded.
Reference: 78
Brand: WELDRACINGPARTS
AN -12 (AN12) flare aluminum weld on adapter, weld this onto your fuel cell, oil cooler, catch tank, swirl pot or any other aluminium tank etc.
Brand: F4U
Downpipe for R5 GT Turbo in stainless steel with V-band 2,5" and heat shield, 500 grams lighter than the previous model.
Brand: WELDRACINGPARTS
Spring connection for 304L exhaust, 65mm long ideal for middle and rear exhaust sections.
Brand: WELDRACINGPARTS
2.5" Stainless steel weld-on downpipe exhaust flange 3 holes
Brand: WELDRACINGPARTS
12mm and 500mm long 304 stainless steel rod to make custom exhaust brackets.
Brand: WELDRACINGPARTS
Iron square tube 40mmx40mmx1,5mm of thickness hot rolled finish.
Brand: WELDRACINGPARTS
Opel Speedster motor Z22Se manifold flange, oval holes to build your own exhaust manifold.
Brand: WELDRACINGPARTS
Steel flat bar of 3,93"x1/4" of thickness hot rolled finish, length.
Stainless steel straight tube 1,9"X5/64" 304L.
