Curvado
Banner
ER 70S-6 contains high levels of manganese and silicon for increased deoxidizing power when more stringent cleaning procedures are not possible.
50 units.
1000 length
This welding rod designed to provide porosity-free, X-ray quality welds and the highest tensile strength (depending on the weld).
The high silicon content increases the fluidity of the weld puddle, creating a smoother looking bead that results from minimal polishing after welding. Ideal for construction work, tanks, truck bodies, agricultural implements, pipes, castings or steel forgings.
To weld in TIG CC (-) with 100% argon as shielding gas.
Specific References
Brand: WELDRACINGPARTS
This useful TIG Torch holder features multiple locations to hold the torch. The magnetic base is enclosed with aluminum, making cleanup easier.
Reference: 365
Brand: WELDRACINGPARTS
55 millimetre or 2'16" diameter, 100 lengths of 304L stainless steel flexible mesh tubing
Brand: WELDRACINGPARTS
Installation kit for the installation of the backet seat in accordance with FIA J253 standard.
Reference: 190
Brand: WELDRACINGPARTS
Stainless steel exhaust cone 304 large diameter 2,5", small diameter 1,69", 3,14" length, wall thickness 1/16"
Brand: WELDRACINGPARTS
WELDRACINGPARTS Tungsten TIG welding Pure Green WP 20 professional, welding electrodes TIG torch, 10 units - Dimensions: 1.6mm 2mm, 2.4mm x 150 mm
Reference: 165
Brand: WELDRACINGPARTS
AN -20 (AN20) flare aluminum weld on adapter, weld this onto your fuel cell, oil cooler, catch tank, swirl pot or any other aluminium tank etc.
Brand: F4U
Downpipe for R5 GT Turbo stainless steel twin pipe with standard flange, 500 grams lighter than the previous model.
Brand: WELDRACINGPARTS
Exhaust manifold flange for Mini Cooper S R53 in stainless steel to build your own exhaust manifold.
Brand: F4U
Exhaust saving pack for R5 GT Turbo stainless steel high performance exhausts. The pack consists of manifold and down pipe with heat shield and full exhaust section of 2,36mm diameter. All of them are dyno tested to significantly increase engine performance.
Brand: WELDRACINGPARTS
Stainless steel elbow 1,32"x5/64" 304L, 90 degrees, 38 radius
Reference: 76
Brand: WELDRACINGPARTS
AN -8 (AN8) flare aluminum weld on adapter, weld this onto your fuel cell, oil cooler, catch tank, swirl pot or any other aluminium tank etc.
Brand: WELDRACINGPARTS
Iron rectangular tube 40mmx20mmx1,5mm of thickness hot rolled finish.
Brand: WELDRACINGPARTS
Dash 10 (AN10) flare stainless steel weld on adapter goodridge. Weld this to your fuel tank, oil cooler, radiator tank, manifold, or any other stainless steel tank, etc.
Brand: WELDRACINGPARTS
Iron square tube 35mmx35mmx1,5mm of thickness hot rolled finish.
ER 70S-6 contains high levels of manganese and silicon for increased deoxidizing power when more stringent cleaning procedures are not possible.
50 units.
1000 length
