Brand: WELDRACINGPARTS
2.5" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated ones that can be found cheaper and of poor quality.
Brand: WELDRACINGPARTS
Stainless steel elbow 1,57"x5/64" 304L,90 degrees, 48 radius
Brand: WELDRACINGPARTS
2" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated ones that can be found cheaper and of poor quality.
Brand: WELDRACINGPARTS
Stainless steel elbow 2,5"x1/16" 304L, 90 degrees, 95 radius
Brand: WELDRACINGPARTS
3" V-Band kit flange clamp stainless steel 304, with a centring device, unlike the zinc-plated that can be found cheaper and of poor quality.
Brand: F4U
Downpipe for R5 GT Turbo stainless steel twin pipe with standard flange, 500 grams lighter than the previous model.
Banner
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
There are 2 products.
